How to Add a Device to a myQ Account

A myQ® device can be a myQ-enabled garage door opener, myQ-enabled gate, a myQ-enabled commercial door opener, or a myQ light control. We have two types of myQ light controls - the Remote Plug-In Light Control and the Remote Light Switch.

Note: myQ enabled garage door openers will have a round yellow* learn button and the myQ logo or Powered by myQ logo on the cover or a myQ Control Panel. If the garage door opener does not have these and is manufactured after 1993, see What is needed to make my opener myQ compatible?

To Add a Device Using the myQ App

1. Log into your myQ account.
2. Tap the Initials in the upper left corner.
3. Tap Device Management.
4. Tap the Device/Hub to add the myQ device.
5. Tap Add New.
6. Select the type of device you want to add:
   1. myQ Garage Door Opener (non-Wi-Fi)
   2. Remote Light Control
   3. Commercial Door Operator
   4. Gate Operator

---

myQ Garage Door Opener (non-Wi-Fi)*

1. Tap on myQ Garage Door Opener
2. The screen displays "Walk up to your garage door opener and locate its learn button", tap Next.
3. Press and release the learn button on the garage door opener once, or the learn button on the door control twice. 
   Note: If you have a Wi-Fi garage door opener, see How to Clear the Wi-Fi Settings on a myQ Wi-Fi Product before attempting to add.
4. Once the garage door opener or door control has been added, name your device then tap Save.

---

Remote Light Control

1. Tap on Remote Light
2. Walk up to your remote light and locate the learn button on the side or under the cover of the remote light switch.
3. Tap Next
4. Press and release the learn button.
5. Name your device and Save.

---

Commercial Door Operator

1. Tap on Commercial Door Operator.
2. Locate your commercial door operator's RADIO button.
3. Tap Next
4. Press and release the RADIO button.
   Note: If you are unable to find the RADIO button, please contact your local authorized LiftMaster® partner for assistance.
5. Once the commercial door opener has been added, name your device then tap Save.

---

Gate Operator

1. Tap on Gate Operator.
2. Locate the Learn or Reset button on the Gate Operator, tap Next.
3. Open your gate with remote or access device and tap Next.
4. Now, either (A) press the gates operator's learn button twice or (B) toggle the gate from reset to run using the reset button switch three times. The gate operator may sound an alert tone. (This step must be done within 30 seconds of opening the gate)
   Note: If you are unable to find the learn button or reset button, please contact your local authorized LiftMaster® dealer for assistance.
5. Once the gate has been added, name your device then tap Save.

---

*Within the US: The Internet Gateway is not intended for use with garage door openers in which the photoelectric sensors located near the bottom of the garage door change power mode (e.g., lights on the sensors turn off after the door is closed), or any Chamberlain Group opener with a yellow learn button manufactured between 2010 and 2021.

https://support.chamberlaingroup.com/s/article/How-to-add-devices-to-a-MyQ-Account-1484145625377